Home 
Delivery 48h 
Secure payments 
Technical & commercial support
Calculate here the amount of paint needed for your project
RD-Deco Isomat Aqua
Go totechnical sheet
White insulating primer for interior walls and ceilings with high hiding power and matt appearance.
RD-Deco Isomat Aqua is a high-quality, single-component waterborne acrylic paint which is ideal for renovating and insulating substrates with old damp, nicotine or other stains.
RD-Deco Isomat Aqua :
• Prevents and blocks the migration of old stains through the coating.
• Thanks to its taut matte appearance, it is ideal as a primer and topcoat for ceilings.
• Can be applied as a primer on exotic or tannic woodwork to block tannin migration.
RD-Deco Isomat Aqua can be applied by brush, roller or spray.
Technical sheet RD-Deco Isomat Aqua
Download technical sheetDescription of the product
USE:
White single-component water-based primer for interior walls and ceilings, with high-coverage and insulating properties, and matte in appearance.
FEATURES:
RD-Deco Isomat Aqua is a high-quality, single-component, waterborne acrylic paint ideal for renovating and insulating surfaces with old damp, nicotine or other stains.
RD-Deco Isomat Aqua :
• Prevents and blocks the migration of old stains through the coating.
• Thanks to its taut matte appearance, it is ideal as a primer and topcoat for ceilings.
• Can be applied as a primer on exotic or tannic woodwork to block tannin migration.
SUBSTRATES:
Plaster, gypsum boards, bricks, concrete, old paints, cement.
Systems
On walls and ceilings:
1 or 2 coats of RD-Deco Isomat Aqua to be applied directly to a clean, grease-free substrate.
Theoretical consumption: +/- 0.15 L/m².
Choose a finishing color from our VOC-free (Volatile Organic Compounds) decorative paints: Ecomat, Ecosatin or Ecosoft.
On tannic or exotic woods :
1 coat of RD-Deco Isomat Aqua to be applied directly to a clean substrate.
Theoretical consumption: +/- 0.15 L/m².
Choose a finishing color from our lacquers:
• RD-Aquatop Matt - Satin - Gloss
• RD-Hydrograff HP Matt - Satin - Gloss
The indicated consumption rates are theoretical and will depend, in particular, on the porosity of the substrate.
Application instructions
APPLICATION CONDITIONS:
Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
Relative humidity: maximum 80 %
Surface temperature must be minimum 3°C (5°F) above dew point.
APPLICATION MEANS:
- Brush (brush or synthetic or silk/polyester brush for acrylic paints)
- Roller (microfibre or polyamide 12 to 14mm)
- Airless (nozzle opening: 013 - 015)
PREPARATION OF THE SUBSTRATE:
The surface must be dust-free, clean, degreased and dry.
In the event of stains, use a cleaning agent such as St-Marc or Solarine.
Joints or cracks: Apply an acrylic putty such as RD-Acryl W to maintain the elasticity of the substrate in fragile and delicate areas, and to fill micro-cracks.
DILUTION:
Dilute with +/- 10% water when RD-Deco Isomat Aqua is applied directly to :
- Gypsum
- Concrete and cement
- Wood
Alternatively, on absorbent or porous substrates, RD-Unifix can be used as an impregnating coat.
DRYING TIME (20°C - 68°F):
Touch dry: +/- 2 hours
Recoatable: +/- 4 hours
CLEANING OF TOOLS:
Water
SPECIFICITIES:
Mix well before use.
Technical data
FINISH (Gardner 60°):
Flat
COLOURS:
White
DENSITY:
1.37 +/- 0.05 g/cm³
SOLIDS CONTENT:
In weight: 60 % +/-2
In volume: 48 % +/-2
VISCOSITY:
90 P (Brookfield 20RPM)
VOC CONTENT:
< 30 g/L
FLASH POINT:
Not flammable
STORAGE:
24 months, keep away from frost and store away from heat.
Norms et tests
 | ISO 16000-6 / VOC Classification in France |
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
VERS. WI23/230220
White insulating primer for interior walls and ceilings with high hiding power and matt appearance.