Delivery 48h
Secure payments
Technical & commercial support

RD-Aquatop PU Mat

High-performance, one-component, quick-drying, mat-gloss finish lacquer for interior and exterior application.

RD-Aquatop PU can be applied directly on many substrates, or as a finish on our anti-corrosion systems when a greater variety of effects (gloss) and high aestetics is required.RD-Aquatop PU has good resistance to UVs, weathering and abrasion.

Packaging

1 l

Surface 1 coat: 10.00m²

2.5 L

Surface 1 coat: 25.00m²

5 l

Surface 1 coat: 50.00m²

Total quantity selected (L): 0

Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0 m²

(*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

Quantity calculator

How much paint do I need to paint my surface?

Color picker

What color can I choose?

Quote request

Ask us for advice or a quote for your project

Technical sheet

Description of the product

USE:

High performance interior and exterior enamel with superior properties.

FEATURES:

RD-Aquatop PU is a single-component top coat based on acrylic and polyurethane resins that offers a hard flexible and wear resistant film that can be used for decorative and protective purposes.

RD-Aquatop PU is water-based, easy to handle, safe and has no fire risks.
It is a fast-drying coating system that greatly reduces downtime during installation.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
RD-Aquatop PU creates a nice and smooth finish. Thanks to its high-quality pigments, it offers very good resistance to humidity and has a very good outdoor durability.

RD-Aquatop PU has successfully been tested to be used for constructions regulated by the LIVING BUILDING CHALLENGE – LEED.

SUBSTRATES:

Various plastics, concrete, cement, wood, metal (with primer), coated surfaces, …

Systems

Ferrous metals		Wet film thickness in microns / mils	Dry film thickness in microns / mils	Consumption per m² / ft² per gallon	Comments
Primer	RD-Monoguard	200 / 8	85 / 3,4	0,20 L / 200	Coverage depends on colour contrast. An extra coat may be required
Finish	RD-Aquatop PU	100 / 4	40 / 1,6	0,10 L / 400
TOTAL			125 / 5

Non-ferrous metals – (stainless steel, aluminium, …), plastics:		Wet film thickness in microns / mils	Dry film thickness in microns / mils	Consumption per m² / ft² per gallon	Comments
Primer	RD-Multiprim	100 / 4	40 / 1,6	0,10 L / 400	Coverage depends on colour contrast. An extra coat may be required
Finish	RD-Aquatop PU	100 / 4	40 / 1,6	0,10 L / 400
TOTAL			80 / 3,2

Wood, concrete, hard plastics:		Wet film thickness in microns / mils	Dry film thickness in microns / mils	Consumption per m² / ft² per gallon	Comments
Primer	RD-Aquatop PU	100 / 4	40 / 1,6	0,10 L / 400
Finish	RD-Aquatop PU	100 / 4	40 / 1,6	0,10 L / 400
TOTAL			80 / 3,2	0,20 L / 200

Tannic and exotic woods		Wet film thickness in microns / mils	Dry film thickness in microns / mils	Consumption per m² / ft² per gallon
Primer	Deco Isomat Aqua	125 / 5	60 / 2.4	0,13 L / 325
2nd layer	RD-Aquatop PU	100 / 4	40 / 1,6	0,10 L / 400
Finish	RD-Aquatop PU	100 / 4	40 / 1,6	0,10 L / 400
TOTAL			140 / 5.6

Pre-painted elements like doors, plinths,…:		Wet film thickness in microns / mils	Dry film thickness in microns / mils	Consumption per m² / ft² per gallon	Comments
Primer/Finish	RD-Aquatop PU	100 / 4	40 / 1,6	0,10 L / 400	Coverage depends on colour contrast. An extra coat may be required

Aesthetical fresh-up:

A single coat is possible on previously painted surfaces in need of an aesthetic refreshment.

Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.

Application instructions

APPLICATION CONDITIONS:

Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
Relative humidity: maximum 80 %
Surface temperature must be minimum 3°C (5°F) above dew point.

APPLICATION MEANS:

Brush, roller or spray gun.
Compressed air: nozzle opening 1,4 mm – 4 to 6 bars of pressure (60 to 90 psi)
Airless: nozzle opening 007 to 009 – Pressure +/- 70 bars (+/- 1000 psi)

PREPARATION OF THE SUBSTRATE:

Preparation will depend on the type of substrate. In general, the surface should be clean and degreased before applying RD-Aquatop PU.

On tannic or exotic woods, we recommend using RD-Deco Isomat Aqua as a first coat to prevent tannin migration through the paint film.

DILUTION:

Product is ready-for-use.

DRYING TIME (20°C - 68°F):

Touch dry: +/- 1h30 hours
Dry: +/- 2 hours
Recoatable: +/- 4 hours

CLEANING OF TOOLS:

Water

SPECIFICITIES:

Mix well before use.

Technical data

FINISH (Gardner 60°):

Mat: 7 +/- 5

COLOURS:

Stock colours: White.
RAL, NCS and bespoke colours.
Available on RD Coatings dispensing system.

DENSITY:

1.2 +/- 0.05 g/cm³

SOLIDS CONTENT:

In weight: 47 % +/-2
In volume: 39 % +/-2

VISCOSITY:

20 - 30 P (Brookfield 20RPM)

VOC CONTENT:

< 50 g/L

FLASH POINT:

Not flammable

STORAGE:

24 months, keep away from frost and store away from heat.

Norms and tests

RED LIST COMPLIANCE	Living Building Challenge v3
VOC EMISSION TEST RESULTS	California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017
TVOC CONCENTRATION RANGE	USGBC’s LEED v4 rating systems
USGBC LEED Version 4, BD&C, ID&C
The WELL Building Standard
ANSI/GBI 01, Green Building Assessment Protocol
	ISO 16000-6 / COV classification in France

Safety data

Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.