RD-Unifix
    • RD-Unifix
    • RD-Unifix
    • RD-Unifix
    • Delivery 48h Delivery 48h
    • Secure payments Secure payments
    • Technical & commercial support Technical & commercial support

    RD-Unifix

    Technical sheet

    Waterborne one component transparent impregnation primer for porous and powdering surfaces.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    1 l
    Surface 1 coat: 10.00m²
    5 l
    Surface 1 coat: 50.00m²
    20 l
    Surface 1 coat: 200.00m²
    Total quantity selected (L): 0
    Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0 m²

    (*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

    Technical sheet

    Description of the product

    USE: 

    Waterborne one component transparent impregnation primer for porous and powdering surfaces.

    FEATURES:

    RD-Unifix is based on acrylic resins dispersed in water. It is used as an impregnation layer on porous substrates to fix and seal the surface prior to applying subsequent coating systems such as decorative or functional waterborne coatings. 

    RD-Unifix is water-based, easy to handle, safe and has no fire risks. 

    It is a fast-drying coating system that greatly reduces downtime during installation. 

    Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings. 

    RD-Unifix has excellent fixing properties and the very small dispersed particles allows a better penetration of the substrate. 

    SUBSTRATES:

    Porous substrates such as bricks, concrete, plaster, and derivatives.

    Systems

    On porous substrates:

    Apply +/- 0,10 L per m² prior to the following coating system. This quantity may change depending on the absorption rate of the substrate. RD-Unifix will penetrate the surface and leave a glossy finish.

    Application instructions

    APPLICATION CONDITIONS:

    Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
    Relative humidity: maximum 80 %

    APPLICATION MEANS:

    Brush, roller, pump sprayer or airless (nozzle 011 – 015).
    Apply until saturation. 

    PREPARATION OF THE SUBSTRATE:

    The surface must be cleaned, degreased and free of dust. 

    DILUTION:

    Product is ready-for-use.

    DRYING TIME (20°C - 68°F):

    Touch dry: +/- 1 hour
    Recoatable: +/- 4 hours

    CLEANING OF TOOLS:

    Water

    SPECIFICITIES:

    Mix well before use.

    Technical data

    FINISH:

    Glossy

    COLOURS:

    Colourless.

    DENSITY:

    1.02 +/- 0.05 g/cm³

    SOLIDS CONTENT:

    In weight:  15 % +/-2
    In volume: 15 % +/-2

    VISCOSITY:

    10 – 20 sec. (Ford Cup 4 – 23°C / 73°F)

    VOC CONTENT:

    0 g/L

    FLASH POINT:

    Not flammable

    STORAGE:

    24 months, keep away from frost and store away from heat.

    Norms et tests

    ISO 16000-6 / VOC Classification in France

    Safety data

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.

    VERS. D001/230221