

Waterborne liquid solution of siloxane polymers for the water repelling protection of outdoor walls and façades.
Protects against penetrating humidity - Allows the substrate to breath - Almost no change of the aspect of the substrate - Very good outdoor durability.
Bricks, concrete and other porous mineral substrates.
For slightly porous substrates: 1 coat is usually enough
For porous substrates: apply minimum 2 coats, wet on wet.
Outdoor: by dry weather.
Ambient temperature: > 5°C
R.H.: max. 80%
Brush or sprayed with a manual spray
The support must be dry, degreased and dust free.
Protect parts which are not to be treated, such as glass or natural stone, against splashes.
Don’t dilute.
Touch dry: +/- 1 hours
Recoatable: wet on wet
Water
Ca. 4 m²/L per coat depending on the porosity of the substrate.
Mix well before use.
Little change of appearance possible on some materials.
Colourless
1 +/- 0.05 g/cm³
In weight: 7 % +/-2
15 sec. (Ford 4 – 23 °C)
0 g/L
Not flammable
24 months, keep away from frost and store away from heat.
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
Waterborne liquid solution of siloxane polymers for the water repelling protection of walls and façades, outdoor.