Home 
Ready for dispatch within 1–2 days 
Secure payments 
Technical & commercial support
Calculate here the amount of paint needed for your project
Plexipaint Mat
Go totechnical sheet
Waterborne acrylic onecomponent flat paint, for outdoor walls. Vapour permeable and waterproof. Very appropriate for different porous substrates.
Also suitable for interior walls where there is ambient humidity, such as in bathrooms, kitchens and laundry rooms.
Technical sheet Plexipaint Mat
Download technical sheetDescription of the product
USE:
Waterborne acrylic onecomponent flat paint, for outdoor walls. Vapour permeable and waterproof. Very appropriate for different porous substrates.
Also suitable for interior walls where there is ambient humidity, such as in bathrooms, kitchens and laundry rooms.
FEATURES:
High covering capacity - Easy to apply because of a high percentage of binder - Permeable to vapours - Waterproof - Very good durability.
SUBSTRATES:
New and old masonry - Cement - Concrete.
Systems
Untreated porous substrates:
• Primer: 1 coat of impregnation RD-UNIFIX
• Topcoat: 2 coats of PLEXIPAINT
Powdering painted substrates:
• Primer: 1 coat of impregnation RD-UNIFIX
• Topcoat: 1 or 2 coats of PLEXIPAINT
Not powdering painted supports:
Direct application of 1 to 2 coats of PLEXIPAINT on the substrate.
CONSUMPTION:
Ca. 10 m²/l per coat
Application instructions
APPLICATION CONDITIONS:
Outdoor: never apply if raining
Ambient temperature: > 5°C (41°F)
Relative humity: max. 80 %
It is important to respect the recommended minimum temperature and maximum humidity level during application and drying.
Special attention should be paid to applications carried out at the beginning or end of the season, when days are shorter and the risk of condensation is high.
It is not recommended to undertake exterior work during the winter period.
APPLICATION MEANS:
Brush, roller or airless (nozzle: 013–018)
PREPARATION OF THE SUBSTRATE:
The substrate has to be clean, dry, and free of dust.
New masonries have to be cleaned first with an iron brush to eliminate all spatters of mortar. Painted supports should be cleaned with a high-pression machine. If the substrate is mossy, the moss must be removed with a special anti-moss product.
DILUTION:
Product is ready-for-use.
DRYING TIME (20°C - 68°F):
Touch dry: +/- 2 hours
Recoatable: +/- 4 hours
CLEANING OF TOOLS:
Water
SPECIFICITIES:
Mix well before use.
Technical data
FINISH:
Mat
COLOURS:
White, bespoke colours.
Available on RD Coatings dispensing system.
DENSITY:
1.45 +/- 0.05 g/cm³
SOLIDS CONTENT:
In weight: 60 % +/-2
In volume: 44 % +/-2
VISCOSITY:
60 - 80 P (Brookfield 20 RPM)
VOC CONTENT:
< 30 g/l
FLASH POINT:
Not flammable
STORAGE:
24 months, keep away from frost and store away from heat.
Norms et tests
 | ISO 16000-6 / VOC Classification in France |
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
VERS. WE01/251118
Waterborne acrylic onecomponent flat paint, for outdoor walls. Vapour permeable and waterproof. Very appropriate for different porous substrates.
Also suitable for interior walls where there is ambient humidity, such as in bathrooms, kitchens and laundry rooms.