Home 
Delivery 48h 
Secure payments 
Technical & commercial support
Calculate here the amount of paint needed for your project
RD-AquaFinish 96
Go totechnical sheet
High performance RAL 9006 metallic effect finish lacquer for interior and exterior application.
RD-AquaFinish is an innovative product designed to provide a metallic effect for the renovation of claddings, garage doors, various equipment, furniture, and more. This coating can be applied as a finish on our anticorrosion products or directly on most non-metallic surfaces.
Thanks to its water-based formulation, RD-AquaFinish is a single-component product that is easy to apply and dries quickly.
Technical sheet RD-AquaFinish 96
Download technical sheetDescription of the product
USE:
High performance interior and exterior metallic effect enamel with superior properties.
FEATURES:
RD-Aquafinish 96 is a single-component topcoat based on acrylic and polyurethane resins that offers a hard flexible and wear resistant white aluminium film effect that can be used for decorative and protective purposes.
RD-Aquafinish 96 is water-based, easy to handle, safe and has no fire risks.
It is a fast-drying coating system that greatly reduces downtime during installation.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
RD-Aquafinish 96 creates a nice and smooth finish. Thanks to its high-quality aluminium pigments, it offers very good resistance to humidity and has a very good outdoor durability.
SUBSTRATES:
Various surfaces like plastics, concrete, cement, wood, metal, when primed accordingly.
Systems
Ferrous metals | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | |
Primer | RD-Monoguard | 200 / 8 | 85 / 3,4 | 0,20 l / 200 |
Finish | RD-Aquafinish 96 | 100 / 4 | 30 / 1,2 | 0,10 l / 400 |
TOTAL | 115 / 4,6 | |||
Non-ferrous metals – (stainless steel, aluminium, …), plastics, wood | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | |
Primer | RD-Multiprim | 100 / 4 | 40 / 1,6 | 0,10 l / 400 |
Finish | RD-Aquafinish 96 | 100 / 4 | 30 / 1,2 | 0,10 l / 400 |
TOTAL | 70 / 2,8 | |||
Choose a RAL 7040 for the color of the primer for better performance.
If the surface will be subject to chemical spills, high wear, or abrasion, apply one or two coats of RD-Hydrograff HP Clear as finish.
Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.
Application instructions
APPLICATION CONDITIONS:
Ambient temperature: minimum 5°C (41°F) – Optimal between 12 and 25°C (54 and 77°F).
Relative humidity: maximum 80%
Surface temperature must be minimum 3°C (5°F) above dew point.
APPLICATION MEANS:
Can be applied by brush, roller, or low-pressure pneumatic spray gun (nozzle opening: 1.8 mm).
Compatible with airless spray systems, equipped for example with a 012 tip (such as Graco FFLP 412) and a maximum pressure of 150 bar.
For optimal results, spray application is recommended. It is advisable to test the application system on a flat surface before starting the actual work.
It is important to maintain a consistent distance between the spray gun and the surface, avoid over-atomization, and prevent applying overly thick coats to ensure a smooth and uniform finish.
PREPARATION OF THE SUBSTRATE:
Preparation will depend on the kind of substrate. In general, the surface must first be coated with a primer, clean and degreased prior to applying RD-Aquafinish 96.
DILUTION:
Product is ready-for-use.
DRYING TIME (20°C - 68°F):
Touch dry: +/- 1h30 hour
Dry: +/- 2 hours
Recoatable: +/- 4 hours
CLEANING OF TOOLS:
Water
SPECIFICITIES:
Mix well before use.
Technical data
FINISH (Gardner 60°):
Gloss : 85% +/-10
COLOURS:
RAL 9006. White aluminum
DENSITY:
1.05 +/- 0.05 g/cm³
SOLIDS CONTENT:
In weight: 32% +/-2
In volume: 29% +/-2
VISCOSITY:
70P +/-10 (Brookfield 20RPM)
VOC CONTENT:
< 130 g/l
FLASH POINT:
Not flammable
STORAGE:
Minimum 24 months protected from frost and excessive temperatures in its original closed packaging.
Norms and tests
 | ISO 16000-6 / VOC Classification in France |
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
VERS. S055/250724
High performance RAL 9006 metallic effect finish lacquer for interior and exterior application.