Home 
Delivery 48h 
Secure payments 
Technical & commercial support
RD-Colorcrete
Technical sheetSingle-component water-based coating to colour concrete, cementitious, and stone-like surfaces.
RD-Colorcrete is used to colour various kind of mineral surfaces such as garden walls, fences, beams etc…
Technical sheet
Description of the product
DESCRIPTION:
Single-component water-based coating to colour concrete, cementitious, and stone-like surfaces.
FEATURES:
RD-Colorcrete is used to colour various kind of mineral surfaces such as garden walls, fences, beams etc…
RD-Colorcrete is based on acrylic resins which impregnates and adheres very well on mineral surfaces. It offers a good coverage and has good resistance against weathering, UVs, and more specifically it protects from efflorescence.
Thanks to its tight film, it doesn’t absorb water and keeps the surface free of moss and green.
RD-Colorcrete is part of the SCS – Single Coating System - product group, meaning that it is used in the same time as primer and finish coat and is usually applied in two layers.
SUBSTRATES:
Concrete, cement, and stone-like surfaces
Systems
Recommended application | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
First coat | RD-Colorcrete | 100 / 4 | 40 / 1,6 | 0,1 L / 400 | Porosity of the substrate can affect the consumption |
Finish | RD-Colorcrete | 100 / 4 | 40 / 1,6 | 0,1 L / 400 | |
TOTAL | 80 / 3,2 | 0,2 L / 200 | |||
Indicated consumption is theoretical and does not consider potential losses during application.
It can also be influenced by the porosity of the substrate.
Application instructions
APPLICATION CONDITIONS:
Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F). Do not paint under direct heavy sunlight.
Relative humidity: maximum 80 %
Surface temperature must be minimum 3°C (5°F) above dew point.
APPLICATION MEANS:
Brush
Roller: polyamide 10-15 mm
Low pressure airgun: 4 bar / 60 psi. Nozzle size: 014
PREPARATION OF THE SUBSTRATE:
The surface must be clean, dust-free, and dry. Clean off the curing additives in case of new concrete. In case of mold or mosses on the surface, remove it with a special anti-moss product and rinse properly.
DILUTION:
Product is ready-for-use.
DRYING TIME: (23°C – 73,4°F / 50% Relative Humidity)
Touch dry (dust free): +/- 1 hour
Recoatable: +/- 2 hours
Dry: +/- 2 hours
CLEANING OF TOOLS:
Water.
SPECIFICITIES:
Mix well before use.
Technical data
FINISH (Gardner 60°):
Mat: +/- 10 % +/- 5
COLOURS:
RAL 7030 Stone grey.
RAL, NCS and customs colors available on RD Coatings dispensing system.
DENSITY:
Ca. 1,10 +/- 0,05 g/cm³
SOLIDS CONTENT:
In weight: 30 %
In volume: 23 %
VISCOSITY:
30 - 40 P (Brookfield 20RPM)
VOC CONTENT:
< 15 g/L
FLASH POINT:
Not flammable.
STORAGE STABILITY:
Minimum 24 months protected from frost and excessive temperatures in its original closed packaging.
Norms and tests
 | ISO 16000-6 / VOC Classification in France |
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
VERS. WE41/230318
Single-component water-based coating to colour concrete, cementitious, and stone-like surfaces.