RD-Monovar PU Glossy

    Technical sheet

    High performance interior and exterior glossy varnish with superior properties.

    This multi-purpose varnish is perfectly suited to protect and strengthen the resistance of surfaces against wear and weathering, including floors. Water-based, one-component, and quick-drying, RD-Monovar PU is easy to use and can be applied to most surfaces or types of paints.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    1 l
    Surface 1 coat: 9.09m²
    2.5 L
    Surface 1 coat: 22.73m²
    5 l
    Surface 1 coat: 45.45m²
    10 l
    Surface 1 coat: 90.91m²
    Total quantity selected (L): 0
    Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0

    (*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

    Technical sheet

    Description of the product

    USE: 

    High performance interior and exterior varnish with superior properties. 

    FEATURES:

    RD-Monovar PU is a single-component varnish based on acrylic and polyurethane resins that offers a hard flexible and wear resistant film that can be used for decorative and protective purposes including floors. 

    RD-Monovar PU is water-based, easy to handle, safe and has no fire risks. 

    It is a fast-drying coating system that greatly reduces downtime during installation. 

    Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings. 

    RD-Monovar PU creates a nice and smooth finish. Thanks to its high-quality pigments and resins, it has a very good resistance against humidity, water and has a very good outdoor durability. It can cover most kind of existing coatings to strengthen the film surface and further protect against dirt, pollution, weathering and UVs. It can be used on walls in humid rooms of technical rooms like kitchens or bathrooms to obtain a tighter finish, easier to clean, and more resistant to humidity or stains.

    RD-Monovar PU has successfully been tested to be used for constructions regulated by the LIVING BUILDING CHALLENGE – LEED.

    SUBSTRATES:

    Various plastics, concrete, cement, wood, metal (with primer), coated surfaces, …

    Systems

    Wood, concrete, plaster, cement, hard plastics:

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Primer

    RD-Monovar PU Glossy

    110 / 4,5

    30 / 1,2

    0,11 L / 367

    Finish

    RD-Monovar PU Glossy

    110 / 4,5

    30 / 1,2

    0,11 L / 367

    TOTAL

     

    60 / 2,4

    0,22 L / 184

     

    Ferrous metals – light to moderate corrosive conditions:

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Primer

    RD-Monoguard Clear

    230 / 9

    80 / 3,2

    0,23 L / 178

    Finish

    RD-Monovar PU Satin

    150 / 6

    40 / 1,6

    0,15 L / 275

    TOTAL

     

    120 / 4,8

     

     

    Non-ferrous metals – (stainless steel, aluminium, …):

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Primer

    RD-Multiprim

    100 / 4

    40 / 1,6

    0,10 L / 400

    Finish

    RD-Monovar PU Satin

    150 / 6

    40 / 1,6

    0,15 L / 275

    TOTAL

     

    80 / 3,2

     

     

    On top of existing coatings:

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Finish

    RD-Monovar PU Satin

    150 / 6

    40 / 1,6

    0,15 L / 275

    Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.

    Application instructions

    APPLICATION CONDITIONS:

    Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
    Relative humidity: maximum 80 %
    Surface temperature must be minimum 3°C (5°F) above dew point.

    APPLICATION MEANS:

    Brush, roller or spray gun.
    Compressed air: nozzle opening 1,4 mm – 4 to 6 bars of pressure (60 to 90 psi)
    Airless: nozzle opening 007 to 009 – Pressure +/- 70 bars (+/- 1000 psi)

    PREPARATION OF THE SUBSTRATE:

    Preparation will depend on the kind of substrate. In general, the surface must always be cleaned and degreased prior to applying RD-Monovar PU.

    DILUTION:

    Product is ready-for-use.

    DRYING TIME (20°C - 68°F):

    Touch dry: +/- 1h30 hours
    Dry: +/- 2 hours
    Recoatable: +/- 4 hours

    CLEANING OF TOOLS:

    Water

    SPECIFICITIES:

    Mix well before use.

    Technical data

    FINISH (Gardner 60°):

    Glossy:    80 +/- 10 

    COLOURS:

    Clear/transparent.

    DENSITY:

    1.05 +/- 0.05 g/cm³

    SOLIDS CONTENT:

    In weight:  28 % +/-2
    In volume: 25 % +/-2

    VISCOSITY:

    20 - 30 P (Brookfield 20RPM)

    VOC CONTENT:

    < 50 g/L

    FLASH POINT:

    Not flammable

    STORAGE:

    24 months, keep away from frost and store away from heat.

    Norms and tests

    RED LIST COMPLIANCE

    Living Building Challenge v3

    VOC EMISSION TEST RESULTS

    California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017

    TVOC CONCENTRATION RANGE

    USGBC’s LEED v4 rating systems

    USGBC LEED Version 4, BD&C, ID&C

     

    The WELL Building Standard

     

    ANSI/GBI 01, Green Building Assessment Protocol

     

    PERSOZ HARDNESS

    ISO 1522

    TABER ABRASION

    ISO 7784-1

    ADHERENCE CROSS CUT

    ISO 2409

    PENCIL HARDNESS

    ISO 15184

    ISO 16000-6 / COV classification in France

    Safety data

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.