RD-AquaFinish 96

    Technical sheet

    High performance RAL 9006 metallic effect finish lacquer for interior and exterior application.

    Useful for the renovation of claddings, garage doors, equipment, furniture etc., RD-AquaFinish is applied as a finish on our anti-corrosion products, or directly on the surface in some cases.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    1 l
    Surface 1 coat: 10.00m²
    2.5 L
    Surface 1 coat: 25.00m²
    5 l
    Surface 1 coat: 50.00m²
    20 l
    Surface 1 coat: 200.00m²
    Total quantity selected (L): 0
    Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0

    (*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

    Technical sheet

    Description of the product

    USE: 

    High performance interior and exterior metallic effect enamel with superior properties. 

    FEATURES:

    RD-Aquafinish 96 is a single-component topcoat based on acrylic and polyurethane resins that offers a hard flexible and wear resistant white aluminium film effect that can be used for decorative and protective purposes.

    RD-Aquafinish 96 is water-based, easy to handle, safe and has no fire risks.

    It is a fast-drying coating system that greatly reduces downtime during installation.

    Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.

    RD-Aquafinish 96 creates a nice and smooth finish. Thanks to its high-quality aluminium pigments, it offers very good resistance to humidity and has a very good outdoor durability. 

    SUBSTRATES:

    Various surfaces like plastics, concrete, cement, wood, metal, when primed accordingly.

    Systems

    Ferrous metals

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Primer

    RD-Monoguard

    200 / 8

    85 / 3,4

    0,20 l / 200

    Finish

    RD-Aquafinish 96

    100 / 4

    30 / 1,2

    0,10 l / 400

    TOTAL

     

    115 / 4,6

     

     

    Non-ferrous metals – (stainless steel, aluminium, …), plastics, wood

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Primer

    RD-Multiprim

    100 / 4

    40 / 1,6

    0,10 l / 400

    Finish

    RD-Aquafinish 96

    100 / 4

    30 / 1,2

    0,10 l / 400

    TOTAL

     

    70 / 2,8

     

     

    Non-ferrous metals option 2 - stainless steel, aluminium, …:

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Primer

    RD-Monoguard

    115 / 4,5

    50 / 2

    0,12 l / 350

    Finish

    RD-Aquafinish 96

    100 / 4

    30 / 1,2

    0,10 l / 400

    TOTAL

     

    80 / 2,8

     

    Choose a RAL 7040 for the color of the primer for better performance.

    If the surface will be subject to chemical spills, high wear, or abrasion, apply one or two coats of RD-Hydrograff HP Clear as finish.

    Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.

    Application instructions

    APPLICATION CONDITIONS:

    Ambient temperature: minimum 5°C (41°F) – Optimal between 12 and 25°C (54 and 77°F).
    Relative humidity: maximum 80%
    Surface temperature must be minimum 3°C (5°F) above dew point.

    APPLICATION MEANS:

    Brush, roller or low pressure pneumatic spray gun.

    PREPARATION OF THE SUBSTRATE:

    Preparation will depend on the kind of substrate. In general, the surface must first be coated with a primer, clean and degreased prior to applying RD-Aquafinish 96.

    DILUTION:

    Product is ready-for-use.

    DRYING TIME (20°C - 68°F):

    Touch dry: +/- 1h30 hour
    Dry: +/- 2 hours
    Recoatable: +/- 4 hours

    CLEANING OF TOOLS:

    Water

    SPECIFICITIES:

    Mix well before use.

    Technical data

    FINISH (Gardner 60°):

    Satin: 40 +/- 5

    COLOURS:

    RAL 9006. White aluminum

    DENSITY:

    1.05 +/- 0.05 g/cm³

    SOLIDS CONTENT:

    In weight:  32 % +/-2
    In volume: 29 % +/-2

    VISCOSITY:

    60 - 80 P (Brookfield 20RPM)

    VOC CONTENT:

    < 130 g/l

    FLASH POINT:

    Not flammable

    STORAGE:

    24 months, keep away from frost and store away from heat.

    Safety data

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.